AVT3 Linear Actuator

Product Properties

AVT3 series Actuator can be used to directly attach to valve shaft without separate reducer because it's output torque is much higher than electromotion's by constitution of the hydraulic drive unit. AVT3 series Actuator is Low power and Environmental product because it uses 200W, 400W BLDE Motor and all power consumption is under 1kW so amount of using power is less. AVT3 series Actuator consists of normal, position outgoing, panel attachment, panel+position outgoing, panel+proportion control type so users can use easily for environment or purpose by selecting. Using LOCAL Switch attached to AVT3 series Actuator, you can easily change speed and various settings.

Product Introduction

AVT3 Linear Actuator

High output torque
AVT3 series Actuator can be used to directly attach to valve shaft without separate reducer because it's output torque is much higher than electromotion's by constitution of the hydraulic drive unit.
Low power & Environmental
AVT3 series Actuator is Low power and Environmental product because it uses 200W, 400W BLDE Motor and all power consumption is under 1kW so amount of using power is less.
Various construction
AVT3 series Actuator consists of normal, position outgoing, panel attachment, panel+position outgoing, panel+proportion control type so users can use easily for environment or purpose by selecting.
Efficiency of installation
AVT3 series Actuator can constitute the system efficiently for optimization with field conditions when install at underground or two-phase type because it can be installed by separated from each other of driving and control part.
Conversion feature of various settings
Using LOCAL Switch attached to AVT3 series Actuator, you can easily change speed and various settings.
Miniaturization & Lightweight
AVT3 series Actuator lets realized miniaturization after modular work of each part and lightweight after the body is made of aluminum die casting.

AVT3

Standard Specifications

Model	AVT3
Enclosure	Waterproof (IP68), Explosion Proof
Option	Self-Weight Descent Type
Electrical Diagram
Exterior Diagram

Model	THRUST FORCE
Model	N	Ib
AVT3-10	6,000	1,348
AVT3-20	10,000	2,191
AVT3-30	13,000	3,034
AVT3-40	25,000	5,732
AVT3-50	40,000	8,935
AVT3-60	57,000	12,813
AVT3-70	78,000	17,535
AVT3-80	100,000	22,930
AVT3-90	130,000	29,168
AVT3-100	160,000	35,913

Actuator Specification
Power Pack	Actuator
H : 245.5 W : 528	H : 191.2 W : 275 L : 375

Automatic Pressure	170 bar (max. 210 bar)
Terminal	Double-sealed structure, 34 Contact points, M4 Screw, Rated AC250V / 5A
Hydraulic Oil	ISO VG46
Standard Painting	RED
Power	50/60Hz, 1Ph, AC 220V, 440V , DC 110V
Setting Method	Opening and parameter setting using a local switch, Password Protection
Motor	Efficiency rate over 90%, BLDC Motor, 200w/400W
Wire Entrance	2 X PF 1"
Control Method	Contact Point, Proportional Control, Communications
Space Heater	Equipped within the controller, 5W
Torque Setting	Variable Relief Valve, Screw Type
Temperature Range	-25℃ ~ 80℃
Opening Measuring Device	Embedded type, Digital/Analog, Percentage (%) shown
Manual Operating Part	Manual Handle, Switch Lever